Introduction

The Kiuwan on premise On-Premises installer is a powerful tool that suits multiple environment scenarios:

• Single-host full fully contained installation.
• Multi-host installation where infrastructure services are externalized.
• Multi-host installation where kiuwan Kiuwan services are distributed (only AWS environments supported so far).
• Any combination of the two previous scenarios.

Depending on your needs, a different installation approach will be needed. Check this installation guide for details on how to proceed and to find the solution that best fits your requirements.

System requirements

Installation requirements

It is mandatory for any host where a Kiuwan on premises service Kiuwan On-Premises is installed to meet this these requirements:

• Linux distribution
• Linux kernel version 3.10 or higher
• Connectivity to SMTP Mail Server.
• Internet connectivity during the installation process (see Installation guidesee Needed internet connections).
• Installing

  The installing user

  must

  can be a root user (or

  have

  with sudo privileges

  .

These software is also needed:

• Docker CE >=19.03.2
• Docker-compose >= 1.24.1
• Java Runtime Environment >=8
• Openssl >= 1.0.2
• Unzip
• GNU tar

• ) or a non-root user. If you choose to install as a non-root user, some sections below need sudo privileges to create users, add namespace mapping, and make docker daemon changes.

• When running the provided Redis Cluster containers (that is, if you are not externalizing the Redis service, see Externalizing Redis), it is recommended for the host machine to keep the same local IP address. If this is not acceptable for you, be aware that all containers should be restarted after an IP change (see My Kiuwan On-Premises local IP address has changed and Redis is not responding anymore).

Needed internet connections

Please make sure your host machines have connection to this servers when installing Kiuwan on premises:

CPU and memory minimum requirements

The following table shows the minimum requirements for each service. Note that these are only minimum requirements. You should take care of giving each service enough resources depending on your system demands.

Note: CPU clock speed and disk speed will affect overal response time. 

With the configuration above a system with the following load should give continuous service without problems:

• Parallel processing of 2 analyses (any additional parallel analysis request will be enqueued, and it will be executed as soon as any of the running analyses finishes)
• 50 concurrent web users or REST API calls.

Given the table above, for a single-host installation where no service is externalized the minimum system requirements are:

• 14GB of RAM and a processor with 8 cores for Kiuwan on premises.

It is recommended that you overscale these characteristics for the OS to have resources available for itself.

The Kiuwan on premise installation tool (kiuwan-cluster)

Kiuwan on premise installation process is carried out by our "kiuwan-cluster" tool.

The tool is provided as a tar.gz file. The following table summarizes the resources you will find once the tool distribution is extracted:

The following sections will guide you through the installation process.

Installation: common steps

This guide will reference two important folders:

• [INSTALL_DIR]: where the installation tool (kiuwan-cluster) will be located.
• [VOLUMES_DIR]: where the persistent volumen will be located.

Sometimes this folders will be referenced inside command line examples. Please make sure you replace any of them with the needed real path.

Note that it is up to you where this folders will be located.

Step 1: download kiuwan-cluster

The first step is to download kiuwan-cluster, the Kiuwan on premises installation tool. It can be downloaded directly from a terminal like this:

wget https://static.kiuwan.com/download/onpremise/kiuwan-cluster.tar.gz

This will download to the current directory the latest available installation tool.

Step 2: untar kiuwan-cluster

Once downloaded you should untar the provided gz file:

tar xvzpf kiuwan-cluster_master.tar.gz

This will untar the installation tool to a folder with extended version information of the tool. For example:

/home/user/kiuwan-cluster_master.XXXX-2.8.YYMM.V

This folder will be referred to as [INSTALL_DIR] through this guide.

Step 3: copy license files

In order to be able to start a Kiuwan on premises installation, you will need two license files:

• configq1.zip
• license.zip

Copy these files to the user-content folder of your installation tool directory (please replace [INSTALL_DIR] with the real location of your installation directory):

cp configq1.zip [INSTALL_DIR]/user-content
cp configq1.zip [INSTALL_DIR]/user-content

Step 4: download and copy the needed driver version for MySQL

Kiuwan on premise needs this exact MySQL driver:

mysql-connector-java-5.1.39-bin.jar

You can download it by executing this command:

wget http://dev.mysql.com/get/Downloads/Connector-J/mysql-connector-java-5.1.39.tar.gz

Copy the downloaded jar file to the user content folder:

cp mysql-connector-java-5.1.39.tar.gz [INSTALL_DIR]/user-content

Step 5: initialize your volumes

The installation tool comes with the base volumes to boot a first installation of Kiuwan on premises. We provide three volumes:

• config-shared: contains the base configuration, shared between different services.
• data-shared: contains the base data structure, shared between different services.
• data-local: contains the base data structure, independent for each service.

Copy the provided volumes to a location of your desire:

sudo cp -rp [INSTALL_DIR]/volumes/config-shared [VOLUMES_DIR]/config-shared
sudo cp -rp [INSTALL_DIR]/volumes/data-shared [VOLUMES_DIR]/data-shared
sudo cp -rp [INSTALL_DIR]/volumes/data-local [VOLUMES_DIR]/data-local

Take note of the locations you choose for each volume. You will need these paths for the next installation step.

Step 6: configure the created volume paths

Edit the file located in [INSTALL_DIR]/config/volumes.properties and set the previous paths to each property:

config.shared=[VOLUMES_DIR]/config-shared
data.shared=[VOLUMES_DIR]/data-shared
data.local=[VOLUMES_DIR]/data-local

Please remember that [VOLUMES_DIR] here is just a placeholder for the real path you chose.

Step 7: configure your email server

Kiuwan needs an working and accessible e-mail server to send notifications.

Edit with your favourite editor the main configuration file, found in your [VOLUMES_DIR]:

sudo vim [VOLUMES_DIR]/config-shared/globalConfig.properties

Note that this is the file located in your [VOLUMES_DIR], not in the [INSTALLER_DIR], which only contains the base volumes.

Edit the following properties under the section named "Kiuwan instances shared configuration":

• kiuwan.mail.host: the host of your email server.

• kiuwan.mail.port: the port of your email server.

• kiuwan.mail.username: the username to use when authenticating with your email server.

• kiuwan.mail.password: the password to use when authenticating with your email server.

• kiuwan.mail.from: the email account to use as the sender.

• kiuwan.default.mail.account: the email account to set to your default Kiuwan user.

Installation: single-host and minimum configuration

Follow this section if you want to proceed and install Kiuwan on premise with no further customization.

The defaults will install Kiuwan on premise with these characteristics:

• Single-host installation, including this services (see System architecture for more details):
  • loadbalancer
  • 1 kiuwan front instance
  • 1 kiuwan analyzer instance
  • 1 kiuwan scheduler instance
  • mysql
  • redis
• HTTPS support when accessing Kiuwan and between the loadbalancer and kiuwan instances.
• Kiuwan on premises deployed in the default domain (https://kiuwan.onpremise.local).

If this is enough for you, just continue with the following steps.

Step 1: deploy user content

On a terminal, navigate to the [INSTALL_DIR] folder and execute this command:

sudo ./deploy-user-content.sh

This will copy the user-content files to the configured volumes and set the needed permissions.

Step 2: install Kiuwan on premises

On a terminal, navigate to the [INSTALL_DIR] folder and execute this command:

sudo ./install.sh

This will:

• Download and run the needed Docker images.
• Install the database resources for Kiuwan on premises.
• Download the latest available Local Analyzer, Engine and Kiuwan for Developers to make them available in your installation.
• Install the engine data in your Kiuwan on premises database.
• Autogenerate the needed configuration for each kiuwan instance.
• Run all the needed containers.

Once the installation is finisished please refere to the Installation guide section.

Installation: advanced configuration

Installation: externalizing services

Installation: clustered environments

Accessing your Kiuwan on premises installation

To access your Kiuwan on premises installation you should take into account whether the selected domain is available in the DNSs your local network may use.

In order to access Kiuwan you will need to do one of the following options:

• Add kiuwan.onpremise.local to your DNS (recommended option).
• Add kiuwan.onpremise.local to your hosts file.

For testing purposes or if you choose the second option, edit this file in the host where you plan to access Kiuwan from:

• Windows OS: C:\Windows\System32\drivers\etc\hosts
• Linux OS: /etc/hosts

Add the following entry to the previous file:

[kiuwan_on_premise_host_ip] [kiuwan_on_premise_host]

For example, the previous entry may look like this for an installation pointing to the default host (note that the IP of the example may change in your local network):

192.168.0.56 kiuwan.onpremise.local

Once the previous steps have been done, you should be able to access Kiuwan on premises entering your Kiuwan host in your browser:

Image Removed

Handling trusted certificates warning messages in your browser   and clients
 

Kiuwan on premises installer tool provides default certificates for the default host name, signed by a supplied CA (Certificate Authority).

The CA public certificate is provided in this file:

• [INSTALL_DIR]/ssl/ca/cacert.pem

In order to make your browser trust the supplied certificates, you will need to add this CA to your browser, and Java clients that access your Kiuwan on premises installation:

• Fixefox, Chrome, Edge: import cacert.pem by using the tools provided by the browsers.
• Java clients (Kiuwan for developers Eclipse, Kiuwan for developers JetBrains, Jenkins, KLA, etc): add the provided cacert.pem to the JRE keystore used by the client. Please refer to the official documentation of your JRE distribution about the Java keytool program.
• Windows clients (Kiuwan for developers VisualStudio): import cacert.pem by using the tools provided by Windows (certmgr.msc).
• Multiplatform clients (Kiuwan for developers VisualStudioCode): import cacert.pem by using the tools provided by your OS.
  

For more details on this topic, please refer to XXXXXXXXXX.

Default users

Kiuwan on premise supplies two user accounts:

Please make sure you change these passwords as soon as possible.

These software are also needed:

• Docker CE >= 19.03.2
• Docker-compose >= 1.24.1
• Unzip
• GNU tar
• Wget
• BC
• Tee
• Ip
• netstat
• Java Runtime Environment >= 8 (needed to generate keystores for custom hosts).
• OpenSSL >= 1.1.1 (needed to generate certificates for custom hosts). Other supported versions of OpenSSL are 1.0.2g and 1.0.2k-fips.

It is also recommended to use the target installation hosts exclusively for Kiuwan services. If you plan on running other containers than Kiuwan's in a single-host installation, please make sure that:

• None of them is using the following network: 172.172.0.0/16
• There are no containers that may block any of these ports:
  • 443: standard HTTPS port (or the one you will configure to access your Kiuwan On-Premises installation).
  • 8143, 8243, 8343, 8443, 8543, 8643, 8743, 8843: ports that Kiuwan front instances listen to (or those you may configure for Kiuwan front instances).
  • 6379: port that Redis instances listen to.
  • 3306: port that MySQL instance listen to (or the port you configure for MySQL).

Special requirements for RedHat, CentOS, and Fedora

If your docker server is running on RedHat, CentOS or Fedora, be sure the filesystem where docker is installed supports d_type (the directory entry data structure that describes the information of a directory on the filesystem).

Some of the above operating systems are not configured with d_type support (see http://www.pimwiddershoven.nl/entry/docker-on-centos-7-machine-with-xfs-filesystem-can-cause-trouble-when-d-type-is-not-supported.

Running on XFS without d_type support causes Docker to skip the attempt to use the overlay or overlay2 driver. See https://docs.docker.com/storage/storagedriver/overlayfs-driver/#prerequisites.

You can check if your existing XFS filesystem has d_type enabled by running the following commands:

$ docker info | grep "Supports d_type:"
Supports d_type: true

$ xfs_info /docker-mount-point | grep ftype
naming =version 2         bsize=4096      ascii-ci=0     ftype=1

In case you get d_type: false or ftype=0, you will need to create a new XFS filesystem with d_type support enabled. Unfortunately, it isn't possible to enable d_type support on an existing filesystem.

There are two options:

• Add a new disk and create a new XFS partition on it.
• Backup your existing data and recreate the XFS filesystem with d_type support enabled.

You can create a new XFS filesystem with d_type enabled by running the following command:

$ mkfs.xfs -n ftype=1 /mount-point

Needed internet connections

Please make sure your host machines have connection to these servers when installing Kiuwan On-Premises:

Proxy configuration

If the host on which you are installing Kiuwan On-Premises needs to access the internet through a proxy server, note that:

• Your OS should know about your proxy settings in order to be able to download the Kiuwan On-Premises installer distribution.
• Docker daemon must know about your proxy settings in order to download images from https://*.docker.com or https://*.docker.io
• Docker must know about your proxy settings in order to propagate them to the created containers.
• Direct access to your SMPT mail server is needed (it is MANDATORY that the host machine can access your mail server regardless of the proxy server).

To instruct your OS to use your proxy settings, please refer to the official documentation for your Linux distribution.

To make Docker daemon use your proxy server, please follow the official Docker documentation on how to set a proxy:

https://docs.docker.com/config/daemon/systemd/#httphttps-proxy

To make Docker use your proxy when creating containers, please follow the official Docker documentation on how to set a proxy to be used by the containers:

https://docs.docker.com/network/proxy/#configure-the-docker-client

Remember to restart both docker daemon and docker to apply proxy configuration changes:

sudo systemctl daemon-reload
sudo systemctl restart docker

You can check if Docker has successfully read your configuration by executing:

docker system info

Check if your proxy configuration is shown in the console:

[...]
HTTP Proxy: http://proxy.domain.com:3456
HTTPS Proxy: http://proxy.domain.com:3456
No Proxy: localhost,127.0.0.1,172.172.0.0/16
[...]

Examples

This is an example of a /etc/systemd/system/docker.service.d/http-proxy.conf file that makes the Docker daemon use a proxy:

[Service]
Environment="HTTP_PROXY=http://user:password@proxy.domain.com:3456"
Environment="HTTPS_PROXY=http://user:password@proxy.domain.com:3456"
Environment="NO_PROXY=localhost,127.0.0.1,172.172.0.0/16"

This is an example of a ~/.docker/config.json that makes Docker propagate proxy configuration to the created containers:

{
	"proxies": {
    	"default": {
			"httpProxy": "http://user:password@proxy.domain.com:3456",
			"httpsProxy": "http://user:password@proxy.domain.com:3456",
			"noProxy": "localhost,127.0.0.1,172.172.0.0/16"
		}
	}
}

CPU and memory minimum requirements

The following table shows the minimum requirements for each service. Note that these are only minimum requirements. You should make sure to give each service enough resources depending on your system demands.

With the above configuration, a system with the following load should give continuous service without problems:

• Parallel processing of 2 analyses (any additional parallel analysis request will be enqueued, and it will be executed as soon as any of the running analyses finishes)
• 50 concurrent web users or REST API calls.

Given the table above, for a single-host installation where no service is externalized the minimum system requirements are:

• 18GB of RAM and a processor with 8 cores for Kiuwan On-Premises.

It is recommended that you overscale these characteristics for the OS to have resources available for itself.

The Kiuwan On-Premises installation tool (kiuwan-cluster)

The Kiuwan On-Premises installation process is carried out by our "kiuwan-cluster" tool.

The tool is provided as a tar.gz file. The following table summarizes the resources you will find once the tool distribution is extracted:

The following sections will guide you through the installation process.

Installation: common steps

Kiuwan On-Premise could be installed and used both in privileged-mode docker setup and unprivileged-mode docker setup. The latter is the recommended way due to improved security of the setup.

This guide references two important folders:

• [INSTALLER_DIR]: where the installation tool (kiuwan-cluster) will be located.
• [VOLUMES_DIR]: where the persistent volumes will be located.

Sometimes these folders will be referenced inside command line examples. Please make sure you replace any of them with the needed real path. Note that it is up to you where these folders will be located.

Step 1 (Install in a rootless mode - recommended for security): Create a non-root user for installing Kiuwan

The execution of this step require administrative permissions. The user executing this section needs sudo privileges. Only execute this section if you are installing Kiuwan, this should be run in unprivileged environment (recommended). Ensure the existing user is added to the docker group and can execute docker commands.

For example, let's suppose the non-root username is steve. Actual username should be used in its place.

Execute the command to add the user to the ‘docker’ group:

sudo usermod -aG docker steve

To configure user namespace mappings correctly, entries must be added to /etc/subuid and /etc/subgid. This involves mapping a non-root user to a specified range of subordinate user and group IDs. It should be ensured that the specified ranges do not overlap with those assigned to any other user in the respective files. Further details can be found in the documentation here.

Example: In /etc/subuid add these lines.

steve:<steve_user_id>:1

steve:100000:65536

In /etc/subgid add these lines.

steve:<steve_group_id>:1

steve:100000:65536 

The user's UID and GID can be retrieved by executing the following command:

id steve

By adhering to these guidelines, it will be ensured that the subordinate ID mappings are correctly established and do not conflict with other users. The changes will take an effect only when a new user session is started.

Then, edit the file: /etc/docker/daemon.json. Add a new userns-remap entry in it. The final JSON would look something like the following:

{
.... ,
.... ,
"userns-remap": "steve"
}

Run below commands to restart Docker:

sudo systemctl daemon-reload
sudo systemctl restart docker

Switch to the non-root user for the next steps, if you are installing as a non-root user.

Step 2: Download kiuwan-cluster

Download kiuwan-cluster (the Kiuwan On-Premises installation tool). It can be downloaded directly from a terminal like this:

wget https://static.kiuwan.com/download/onpremise/kiuwan-cluster.tar.gz

The latest available installation toll is downloaded to the current directory.

Note that, as stated in System requirements, you will need access to static.kiuwan.com in order to download this file. You should also check your proxy configuration if you access the internet over a proxy server.

Step 3: untar kiuwan-cluster

Once downloaded, you should untar the provided gz file:

tar xvzpf kiuwan-cluster.tar.gz

This will untar the installation tool to a folder with extended version information of the tool. For example:

/home/user/kiuwan-cluster_master.XXXX-2.8.YYMM.V

This folder will be referred to as [INSTALLER_DIR] throughout this guide.

Step 4: Copy license files

To start a Kiuwan On-Premises installation, you need two license files:

• configq1.zip
• license.zip

Copy these files to the user-content folder of your installation tool directory (please remember to replace [INSTALLER_DIR] with the real location of your installation directory):

cp configq1.zip [INSTALLER_DIR]/user-content
cp license.zip [INSTALLER_DIR]/user-content

Step 5: Download and copy the needed driver version for MySQL

Kiuwan On-Premises needs this exact MySQL driver:

mysql-connector-java-5.1.39-bin.jar

You can download it by executing this command and extracting the jar file included inside the tar:

wget https://cdn.mysql.com/archives/mysql-connector-java-5.1/mysql-connector-java-5.1.39.tar.gz

Untar the downloaded file:

tar xvzpf mysql-connector-java-5.1.39.tar.gz

Copy the connector jar file to the user content folder:

cp mysql-connector-java-5.1.39/mysql-connector-java-5.1.39-bin.jar [INSTALLER_DIR]/user-content

Step 6: Configure the volumes paths

The installation tool provides the base volumes needed to boot a first installation of Kiuwan On-Premises. Three volumes are included:

• config-shared: contains the base configuration, shared between different services.
• data-shared: contains the base data structure, shared between different services.
• data-local: contains the base data structure, independent for each service.

The installation tool needs to know where you want these volumes to reside. To do so, edit the file located in [INSTALLER_DIR]/config/volumes.properties and set desired locations:

config.shared=[VOLUMES_DIR]/config-shared
data.shared=[VOLUMES_DIR]/data-shared
data.local=[VOLUMES_DIR]/data-local

Please remember that [VOLUMES_DIR] is just a placeholder for the real path you chose.

Note that you need to create the configured folders by running the following command (it is conditional, based on root or rootless installation):

[sudo] mkdir [VOLUMES_DIR]

In case you are using different base directories for each volume, you must create all the needed base directories.

Step 7: Initialize your volumes

Copy the provided volumes to the configured location by running this script (it is conditional, based on root or rootless installation):

cd [INSTALLER_DIR]
[sudo] ./deploy-volumes.sh

Step 8: Configure your email server

Kiuwan On-Premises needs a working and accessible e-mail server to send notifications.

Edit with your preferred editor the main configuration file, found in your [VOLUMES_DIR]:

[sudo] vim [VOLUMES_DIR]/config-shared/globalConfig/globalConfig.properties

Edit the following properties under the section named "Kiuwan instances shared configuration":

• kiuwan.mail.host: the host of your email server.

• kiuwan.mail.port: the port of your email server.

• kiuwan.mail.authentication: a flag to indicate if your mail server needs authentication or not.

• kiuwan.mail.username: the username to use when authenticating with your email server (only applies if kiuwan.mail.authentication is true).

• kiuwan.mail.password: the password to use when authenticating with your email server (only applies if kiuwan.mail.authentication is true).

• kiuwan.mail.from: the email account to use as the sender.

• kiuwan.mail.secure.layer: the security layer that your mail server uses (ssl, tls or none). Set to none if your mail server uses a plaintext connection.
• kiuwan.mail.secure.layer.value: the value to set to the ssl or tls (true or false). Only applies if kiuwan.mail.secure.layer is not none.
• kiuwan.default.mail.account: the email account to set to the default Kiuwan user (kiuwanadmin).

Mail server configuration examples

If your mail server uses a plaintext connection without authentication, set these properties values (other mail server properties values will be ignored):

• kiuwan.mail.authentication=false
• kiuwan.mail.secure.layer=none

If your mail server uses a TLS secure connection but does not need authentication:

• kiuwan.mail.authentication=false
• kiuwan.mail.secure.layer=tls
• kiuwan.mail.secure.layer.value=true

If your mail server uses a SSL secure connection and needs authentication:

• kiuwan.mail.authentication=true
• kiuwan.mail.username=myuser
• kiuwan.mail.password=mypassword
• kiuwan.mail.secure.layer=ssl
• kiuwan.mail.secure.layer.value=true

If your mail server uses a plaintext connection and needs authentication:

• kiuwan.mail.authentication=true
• kiuwan.mail.username=myuser
• kiuwan.mail.password=mypassword
• kiuwan.mail.secure.layer=none

Step 9 (When installing in a rootless mode): Enable namespaces in Kiuwan config 

Only execute this section if you want to install Kiuwan as a non-root user. Edit with your preferred editor the main configuration file, found in your [VOLUMES_DIR].

vim [VOLUMES_DIR]/config-shared/globalConfig/globalConfig.properties
Set kiuwan.ownNamespaceEnabled=true

Step 10: (Optional) Enable MySQL database port access

Only execute this section if you want to install kiuwan as a non-root user and you want to enable access to MySql port on host. Default value is false. This can be enabled later on after the upgrade separately if you are unsure right now. Edit with your preferred editor the main configuration file, found in your [VOLUMES_DIR].

vim [VOLUMES_DIR]/config-shared/globalConfig/globalConfig.properties
Set kiuwan.accessMySql=true

Installation: Single-host and minimum configuration

Follow this section if you want to proceed and install Kiuwan On-Premises with no further customization.

The defaults will install Kiuwan On-Premises with these characteristics:

• Single-host installation, including these services (see Kiuwan On-Premises Distributed System Architecture for more details):
  • Apache as a load balancer.
  • A Kiuwan front instance.
  • A Kiuwan analyzer instance.
  • A Kiuwan scheduler instance.
  • MySQL database.
  • Redis cluster.
• HTTPS support when accessing Kiuwan and between the loadbalancer and Kiuwan instances.
• Kiuwan On-Premises deployed in the default domain (https://kiuwan.onpremise.local).

If this is enough for you, just continue with the following steps.

If you plan to change the default domain, please refer to the Modifying the default domain section before continuing and come back here after you have made the needed changes.

Step 1: Deploy user content

On a terminal, navigate to the [INSTALLER_DIR] folder and execute this command:

[sudo] ./deploy-user-content.sh

This copies the user-content files to the configured volumes and set the needed permissions.

Step 2: Install Kiuwan On-Premises

On a terminal, navigate to the [INSTALLER_DIR] folder and execute this command:

sudo ./install.sh

This will:

• Check if your host meets the minimum installation requirements.
• Download and run the needed Docker images.
• Install the database resources for Kiuwan On-Premises.
• Download the latest available Local Analyzer, Engine and Kiuwan for Developers to make them available in your installation.
• Install the engine data in your Kiuwan On-Premises database.
• Autogenerate the needed configuration for each Kiuwan instance.
• Run all the needed containers.

Once the installation is finisished please refer to the Accessing your Kiuwan On-Premises installation section.

Accessing your Kiuwan On-Premises installation

In order to access your Kiuwan On-Premises installation you should follow a few more steps.

Step 1: Add your domain to your local network DNS

To access your Kiuwan On-Premises installation you should take into account whether the selected domain is available in the DNSs your local network may use.

In order to access Kiuwan you will need to do one of the following options:

• Add kiuwan.onpremise.local to your DNS (recommended option).
• Add kiuwan.onpremise.local to your hosts file.

For testing purposes or if you choose the second option, edit this file in the host where you plan to access Kiuwan from:

• Windows OS: C:\Windows\System32\drivers\etc\hosts
• Linux OS: /etc/hosts

Add the following entry to the previous file:

[kiuwan_on_premise_host_ip] [kiuwan_on_premise_host]

For example, the previous entry may look like this for an installation pointing to the default host (note that the IP of the example may change in your local network):

192.168.0.56 kiuwan.onpremise.local

Step 2: Add your certificates' CA to your clients

Depending on whether you are using a trusted CA or not to sign your certificates, you may need to add the CA to your client's certificate store to avoid warning messages. 

Please refer to the Adding the provided or a custom CA to Kiuwan On-Premises' clients section for a complete explanation on how to handle this depending on your installation configuration.

Step 3: Access Kiuwan On-Premises

Accessing the web application

Once the previous steps have been done, you should be able to access Kiuwan On-Premises entering your Kiuwan host in your browser which by default is:

https://kiuwan.onpremise.local

Note that although the installation process may have finished, the Kiuwan servers may need some minutes to start up. If this is the case, a loading page will be shown (as long as you are using the provided Apache load balancer service):

Image Added

Once Kiuwan On-Premises services are started, you will be redirected to your Kiuwan On-Premises installation's main login page:

Image Added

Downloading Kiuwan Local Analyzer

Once logged into the web application, you can download Kiuwan Local Analyzer by clicking on the "Download Kiuwan Local Analyzer" option in the top right drop-down menu. 

 Image Added

Consuming Kiuwan REST API

To access your Kiuwan On-Premises installation via its REST API, you should point to this URL:

http(s)://[KIUWAN_DOMAIN]/saas/rest/v1

Please refere to the Kiuwan REST API documentation deployed in your Kiuwan On-Premises server for more details:

http(s)://[KIUWAN_DOMAIN]/pub/doc/rest-api/kiuwan-rest-api.html

You can also access the REST API documentation through the link shown in your Kiuwan On-Premises login page.

Configuring Kiuwan for Developers

To install the Kiuwan for Developers plugin you should point to the corresponding download endpoint for each Kiuwan for Developers distribution:

For more information visit Kiuwan for Developers page.

Default users

Kiuwan On-Premises is provided with two user accounts:

Please make sure you change these passwords as soon as possible, by selecting the option "Account management" from the menu in the upper right corner and selecting "Change Password". 

Enable MySQL port after completing installation (When installed in rootless mode)

If you want to enable MySQL port access on the host machine after namespace is enabled. You need not run this if you had already enabled it during installation. Only execute this section if you are running as a non-root user. For root user installation ii is enabled by default.

Edit with your preferred editor the main configuration file, found in your [VOLUMES_DIR].

vim [VOLUMES_DIR]/config-shared/globalConfig/globalConfig.properties
Set kiuwan.accessMySql=true

Change the directory to [INSTALLER_DIR] and execute:

./openMysqlPort.sh

...